MOTTURA MOTORISED CURTAIN TRACK
Power_801
MOTOR DRIVEN SYSTEM FOR DRAPED CURTAINS DESIGNED FOR LARGE
ROOMS OR STAGE CURTAINS
«Power 801» is the top of the range system for motor driven draped curtains for
large rooms and theatres, designed to offer high technology and top performance,
but at the same time suitable for installation without the assistance of any
particularly specialised technicians. The system is ideal for draped curtains up to
30 m and weighing up to 250 kg for central or side opening curtains.
«Power 801» runs on 220 V and is electronically controlled offering as many as
three different curtain transfer speeds, from 12 to 24 m/minute. The power is
transmitted by a continuous polyurethane metering belt with steel strands that
eliminate any band stretching even on large scale systems. Built-in diagnostics by
means of LEDs on the control panel give immediate feedback on the status
of the system. «Power 801» can be curved with a minimum radius of 150 cm (for
the intended use this value is optimal). It can be installed in parallel with a specific
system that guarantees emergency operation in the event of a black-out.
Power_591-592
MOTOR DRIVEN SYSTEM FOR DRAPED CURTAINS, FOR LARGE
ROOMS AND THEATERS
The actuator consists of a 24 VDC motor with wide-range switching power
supply 110-220 VAC / 24 VDC and electronics that supervise system
operation. The sliding speed of the curtain is 25 cm/sec.
Power is transmitted by polyurethane toothed belt.
Maximum guaranteed dimensions: length 24 meters, weight 160 Kg.
Side, symmetrical or asymmetrical center openings, 90° curves with 35 cm
radius, or wide radius arches are possible.The twin-track profile is
indicated for curtains with large overlap. The use of sliders on ball
bearings ensures good operation even near the weight limit.
The system electronics has been developed to allow use of the Power 591
system in wireless digital networks or by wire with bi-directional exchange
of data between actuator and control device.
Power_501-511
MOTORISED DRAPED CURTAIN SYSTEM FOR LARGE AREAS OR
STAGE CURTAINS
The system is operated by a 220 Vac motor:
220 V/130 W for curtains 15 m W max. and 5 m H, weighing not more
than 30 kg.
The two-channel track is recommended for curtains with an ample
overlap.
The curtain opening can be central, lateral or asymmetric.
The system is suitable for ceiling installations with inset rotating steel keys
and for wall ones. The one-channel system allows 90° curved tracks or
ones with wide radius centring to be installed.
Sliding is guaranteed by roller gliders with a brass journals or by gliders
on ball bearings for curtains over 7 m.
Power_491-492
MOTORISED DRAPED CURTAIN SYSTEM FOR LARGE AREAS
The system is operated by a 24 Vdc motor with incorporated
220 Vac/24 Vdc power supply unit, provided with a digital circuit for
automatic limit stop regulation. The system has provision to house the R.F.
receiver module for remote control. For use with curtains 1000 cm W max.
and 300 cm H weighing not more than 18 kg. The two-channel track is
recommended for curtains with an ample overlap.
The curtain opening can be central, lateral or asymmetric. The system is
suitable for ceiling and wall installations. The one-channel 491 system
allows 90° curved tracks or ones with wide radius centring to be installed.
Sliding is guaranteed by roller gliders for all curtains.
Power_401-411
MOTORISED DRAPED CURTAIN SYSTEM MAINLY FOR DOMESTIC USE
The system is operated by a 24 Vdc motor with incorporated 220 Vac/24 Vdc
power supply unit incorporating the electronic limit stop system. For use
with curtains 600 cm W max. and 300 cm H weighing not more than 8 kg.
The two-channel track is recommended for curtains with an ample
overlap. The curtain opening can be central, lateral or asymmetric.
The system is suitable for ceiling and wall installations.
System «401» allows 90° curved tracks or ones with wide radius centring
to be installed. Sliding is guaranteed by self-lubricating polyethylene slides
or by roller gliders for curtains at the load limit.
About Corona Contracts
As a manufacturer we offer the highest quality products and expert knowledge to the contracts market. See Mottura section. Our competitive pricing and customer service make us the first choice for, Main Contractors, Facilities Managers, Local Authorities, End Users, Architects, and Designers, etc.
Working together on all aspects of the initial design, specification, manufacture and installation, Corona Contracts are able to offer the complete solution. Our dedicated technicians and installation engineers work with contractors, architects and end users at an early stage and take complete responsibility in undertaking site surveys and on site project management
thus ensuring the smooth running of the project from start to finish.
Many successful projects completed in Lancashire, Cumbria, Cheshire, Merseyside, Greater Manchester, Preston, Liverpool, the North West and throughout the UK.
Mottura
Northwest Stockist & Distributor
Corona Contracts are stockists and distributors of the complete range of Mottura technical blinds, curtain track systems, cubicle systems and technical FR fabrics. See the Mottura Section for more detailed specification information.
MORE ON MOTTURA...Advice
From the initial contact through to installation our expert knowledge is at your disposal. We are able to provide consultation and solutions to many commercial workplace based issues including privacy, solar heat and glare.
Specification
During our survey and proposal we will make recommendations based on the client’s needs and available products. The solution may be found in one of our products, or a combination of ranges.
Manufacture
Taking complete control of availability and cost we are able to meet our clients timescales and budget constraints in all cases. Our installations are completed by our own fully trained and competent team members.
Many successful projects completed in Lancashire, Cumbria, Cheshire, Merseyside, Greater Manchester, Preston, Liverpool, the North West and throughout the UK.