Garden_436
PLEATED BLIND SYSTEM FOR SKYLIGHTS
436/1 with chain: horizontal, vertical and raked sliding; filtering and semi-dimming blinds 200x400 cm max. 436/2 with gear: horizontal, vertical and sloping sliding; filtering and semi-dimming blinds 200x400 cm max. 436/3 with motor: horizontal, vertical and raked sliding; filtering and semi-dimming blinds 250 g/m2 200x400 cm max. 24 Vdc motor with separate 220 Vac/24 Vdc power supply unit with electronic limit stop system; sliding speed 16 cm/s. Installation with inset rotating key.

Plì_390
PLEATED BLIND SYSTEM WITH 25 mm PLEATS
Suitable for domestic and professional installations. Horizontal, vertical and sloping sliding. Suitable for filtering and semi-dimming blinds 340x340 cm max. Cord operated. Guillotine front stop with cord separation. Bitt lateral stop. Fixing with tempered, nickel-plated steel piano-wire click supports.

Plì_391
MOTORISED PLEATED BLIND SYSTEM WITH 25 mm PLEATS
Suitable for domestic and professional installations. Vertical sliding. Suitable for filtering or semi-dimming blinds 300x300 cm max. The system is operated by a 24 Vdc motor with separate 220 Vac/24 Vdc power supply unit incorporating the electronic limit stop system. Lifting is done by cord winding spools operated by a hexagonal steel shaft. Fixing with aluminium click supports.

Energy_428-440-450-472
MOTORISED ROLLER BLIND WITH24 VDC MOTOR
System suitable for indoor use. Low-voltage (24 Vdc) motor drive with separate power supply unit. The blind can be stopped in any position using an adjustable limit stop. Thermoplastic brackets with 30 mm and 42 mm projection. Ceiling or wall installation. Button control, single or group radio control. Colours available: supports white - black - silver - bronze; base: RAL 9016 white - RAL 9005 black; silver anodised, bronze.

Handle_8234_1765
WINCH OPERATED ROLLER BLIND FOR PROFESSIONAL USE
For use with filtering, reflecting and dimming fabrics. System suitable for indoor and outdoor use. Gear operation: standard with 1:2 ratio (art. 8234) and maxi with 1:4 ratio (art. 1765). The winch drive allows: 8234: 3 kg max. - 1765: 10 kg max. The blind can be stopped in any position. System 1765 is available in a limit stop system version. Ceiling or wall installation.

Plus_1929
DOUBLE OPERATING ROLLER BLIND SYSTEM WITH CHAIN LOWERING AND DECELERATOR SPRING RAISING
A sophisticated mechanism, inserted in the chain control allows slow raising and stopping of the blind with extreme precision in any position. 200 cm W max. and 300 cm H max. The system is suitable for domestic and professional environments. Ceiling or wall installation. 32 mm ø winding tube.

Rollbox_145-165-185
ROLLER BLIND PROGRAMME WITH BOX AND SIDE GUIDES FOR DIMMING FILTERING AND REFLECTING USE
Decelerated free spring operated. Aluminium alloy boxes of:
Rollbox 145 - 45x51 mm Rollbox 165 - 65x74,3 mm Rollbox 185 - 85x97,2 mm The spring deceleration system regulates the blind rising speed. The blind can be stopped in several positions or when fully opened/closed Ceiling or wall installation. Versions 165 and 185 are fitted with an inspectable box for blind maintenance. The aluminium side guides are available from 40 to 55 mm. Rollbox 165 and 185 are fitted with a limit stop system (optional). Versions 145 and 165 are available in the special version for skylights; horizontal, vertical and sloping installation. Max. size 120x120 cm All three systems can also be used without side guides.

Rollbox_160-260-460-660
BOXED ROLLER BLIND SPECIFIC FOR FRAMES INSTALLATION SUITABLE FOR DIMMING, FILTERING AND REFLECTING USE
Installation: Embedding on window frame - Embedding on window wing Embedding on vasistas Uses 60x88 mm aluminium alloy boxes Rollbox 160 - Deceletared spring operating Rollbox 660 - Skylight systems; deceletared spring operating Rollbox 260 - Chain operating Rollbox 460 - 24Vcc motor operating

Garden_431-432
SKYLIGHT CURTAIN SYSTEM
431/1 using chain with clutch: for use with straight, horizontal or sloping systems, 200 cm W max. and 600 cm H with 250 g/m2 max. filtering fabrics, with total weight not greater than 3 kg (horizontal). 431/2 using winch: for use with horizontal, vertical and sloping systems, including centred, 200 cm W max. and 600 cm H 250 g/m2 max. filtering or dimming fabrics, with total weight not greater than 6.5 kg (horizontal). Installation using inset rotating key.

Garden_531-532
MOTORISED MEDIUM/LARGE SKYLIGHT CURTAIN SYSTEM
max: 260 g/m2 filtering and dimming curtains. Horizontal, vertical or sloping sliding. Bendable to a wide radius (50 cm minimum). The system allows side-by-side installation for large roof areas. 220V-133W motor (110V-133W on request). Installation using inset rotating key.

Garden_551
SYSTEM FOR LARGE SKYLIGHT CURTAINS WITH MOTOR DRIVE
Screening and blackout curtains max: 700 g/m2. Horizontal, vertical or angled sliding. Large radius curvature (min. 50 cm). The system permits parallel installation for large coverings. The actuator consists of a 24V DC motor with wide-range switching power supply 110-220V AC / 24V DC and electronics to control the system. The sliding speed of the curtain is 12,5 cm/s. Power is transmitted by means of a looped polyurethane toothed belt. The control electronics have been developed to use the «551» system in wireless digital network or by wire with bi-directional exchange, between actuator and control device. For ceiling or recessed installation.

Venì_16-25
VENETIAN BLIND FOR INTERIORS WITH 16-25 mm ADJUSTABLE ALUMINIUM SLATS
System suitable for domestic and professional environments. Operation: Double command (with cord and adjustment rod) Single command by chain 24 Vdc motor Gear with rod and crank handle Transmitted commands Slats available in the following versions: Classic - Classic Opaque - Metal - Panoramic - Prisma Installation: ceiling, wall and built-in with inset rotating keys.

Mono_371
VARIABLE ANGLE VERTICAL DUAL CURTAIN SYSTEM WITH SINGLE COMMAND OPERATION
Suitable for domestic and professional environments. Belt drive system allowing fabric louvre direction and traverse control with a single operation. Mono 371/1 with chain Mono 371/2 with winch Usable with 127 mm (5”) - 89 mm (3.5”) fabric strips. Bendable:through 90° with 50 cm radius; wide radius 100 cm min. Ceiling and wall installation with inset rotating keys.

Mono_373
SYSTEM FOR VERTICAL TILTING LOUVRE BLINDS WITH MOTOR DRIVEN ACTION
Suitable for commercial applications. The system is driven by a 24Vdc digitally controlled motor incorporating a 220Vac /24Vdc power supply unit. The system is set up to take the r.f. receiver module for remote control. Tape drawing system allows louvre direction to be set in a single action. For use with louvres from 127 mm (5”) - 89 mm (3,5”). Can be curved at both 90° and wide angle. For ceiling or wall fitting with retractable turning handle. Sliding speed 5.0 cm/s

Dual_359
COMPACT SYSTEM FOR VERTICAL LOUVRE BLINDS WITH DUAL CONTROL
Ideal for both domestic and professional use. Chain operated rotation. Cord operated traverse. Suitable for max. 6 m blinds weighing no more than 14 kg. Can be used with louvres from 127 mm (5”) - 89 mm (3.5”) Ceiling and wall mounted. Because of limited louvre/ceiling clearance, also suitable for fitting to aluminium window frames.

© Corona Contracts 2010 | Web Design by achroma.co.uk